Difference between revisions of "Shared:2019Concept"

From cs
Jump to: navigation, search
(Off-Earth Manufacturing and Construction (of Habitats))
Line 35: Line 35:
 
[[File:FOR WIKI.jpg| 850px]]
 
[[File:FOR WIKI.jpg| 850px]]
 
Fig.1: In-situ progress of excavation and preparation of inhabitable spaces
 
Fig.1: In-situ progress of excavation and preparation of inhabitable spaces
 +
 +
=== '''Melissa Life Support System - a conversation with Robert Lindner and Christel Paille from ESA''' ===
 +
 +
The Melissa system is a unique and indispensable tool for space exploration. It ensures a reliable support of vital functions during the flight with potential use for Off-Earth Habitats.
 +
We have talked with Robert Lindner and Christel Paille from ESA ESTEC about the integration of this system in our Mars habitat, about the LSS itself and their vision for the future. Following here is a series of topics discussed:
 +
 +
Is it possible to operate Melissa on an economy-system, for instance shut it off for one of the three inflatables it is connected to?
 +
A Life Support System is designed to operate at its maximum capacity corresponding to the volume of the habitat it has been designed for. Although this system can be adaptable to different inputs (for instance the metabolism of humans changes during the night), it is preferred not  to have accumulations (high inputs and low outputs).
 +
 +
What are the possibilities of scaling up the system? And the challenges?
 +
The current capacity of the Melissa prototype for experiments corresponds to the oxygen consumed by one human. We are currently looking into the possibilities of scaling up the system. Because it is based on biochemical processes, the scaling would not be happening in a linear manner (increase in one compartment might cause a three-fold increase in another). Also, regarding the astronauts needs in terms of food, the diet is based on animal input, which currently is more feasible to be provided from Earth.
 +
 +
How much of a Melissa system could be created with materials on site? What is the possibility of the use of regolith/water from the Martian surface?
 +
Currently Melissa has a membrane for processing the recycling of grey water. If we think about oxygen, this could be obtained through either electrolysis or classical chemical reduction processes. The regolith on Mars has substantial amounts of oxygen, and if the regolith would be processed for obtaining oxygen, a side effect of this process is obtaining metals as well through the extraction. The challenge is that this process would necessitate complex industrial facilities and considerable amounts of energy.
 +
Furthermore, one important implication of supplying resources such as on-site extracted water from ice is the insuring and monitoring of water quality, which does currently take place by ISS within a closed habitat.
 +
 +
What is the current capacity of Melissa LSS (in terms of oxygen/water/waste) and how close/far does this system need to be located to the living environment that it serves?
 +
Currently the pilot installation in Barcelona is able to recycle 100% of oxygen, water, bio-waste. Provided there is a reliable distribution infrastructure, there is no reason why it should be too close to the system. One idea would be to have a central hub that distributes resources to all the habitats.
 +
 +
What is the degree of redundancy of such a system (imagine loss of insulation capacities of the inflatable/accident)?
 +
Operating with a no redundancy or even single redundancy is not an option for the Melissa system. It operates on a redundancy level by which at every moment two systems are working in parallel. In case one of them stops working, the other takes over.
 +
Regarding the possibility of an accident such as a fire inside the inflatable, the space must be evacuated and isolated, first extinguishing the fire, switching off the ventilation system, making sure smoke does not spread around and that no more oxygen is coming in.
 +
 +
We are excited to stay in tune with the development of the Melissa system, realizing that the dialogue between the technical development of such a system and its architectural purpose relating human life support for off-Earth habitats will be essential.
 +
 +
https://www.esa.int/Enabling_Support/Space_Engineering_Technology/Melissa/Closed_Loop_Compartments
 +
  
 
=== '''3D printing approach''' ===
 
=== '''3D printing approach''' ===

Revision as of 13:35, 22 March 2020


Off-Earth Manufacturing and Construction (of Habitats)


Process

ESA 7.jpg

Excavation and inflatable structure

ExcavationProcess.jpg

1. First phase of robot-aided, downward progressing excavation and gradual tunnel reinforcement using 3D printing.

2. Completion of excavation in upward movement.

3. Pressurized inflatable (as for instance https://www.extremetech.com/extreme/297081-aerospace-firm-shows-off-giant-inflatable-space-habitat) for the living environment is placed in the created cavity between the spiraling tunnels.

Reference: Inflatable Structure for Space- PDF Link


FOR WIKI.jpg Fig.1: In-situ progress of excavation and preparation of inhabitable spaces

Melissa Life Support System - a conversation with Robert Lindner and Christel Paille from ESA

The Melissa system is a unique and indispensable tool for space exploration. It ensures a reliable support of vital functions during the flight with potential use for Off-Earth Habitats. We have talked with Robert Lindner and Christel Paille from ESA ESTEC about the integration of this system in our Mars habitat, about the LSS itself and their vision for the future. Following here is a series of topics discussed:

Is it possible to operate Melissa on an economy-system, for instance shut it off for one of the three inflatables it is connected to? A Life Support System is designed to operate at its maximum capacity corresponding to the volume of the habitat it has been designed for. Although this system can be adaptable to different inputs (for instance the metabolism of humans changes during the night), it is preferred not to have accumulations (high inputs and low outputs).

What are the possibilities of scaling up the system? And the challenges? The current capacity of the Melissa prototype for experiments corresponds to the oxygen consumed by one human. We are currently looking into the possibilities of scaling up the system. Because it is based on biochemical processes, the scaling would not be happening in a linear manner (increase in one compartment might cause a three-fold increase in another). Also, regarding the astronauts needs in terms of food, the diet is based on animal input, which currently is more feasible to be provided from Earth.

How much of a Melissa system could be created with materials on site? What is the possibility of the use of regolith/water from the Martian surface? Currently Melissa has a membrane for processing the recycling of grey water. If we think about oxygen, this could be obtained through either electrolysis or classical chemical reduction processes. The regolith on Mars has substantial amounts of oxygen, and if the regolith would be processed for obtaining oxygen, a side effect of this process is obtaining metals as well through the extraction. The challenge is that this process would necessitate complex industrial facilities and considerable amounts of energy. Furthermore, one important implication of supplying resources such as on-site extracted water from ice is the insuring and monitoring of water quality, which does currently take place by ISS within a closed habitat.

What is the current capacity of Melissa LSS (in terms of oxygen/water/waste) and how close/far does this system need to be located to the living environment that it serves? Currently the pilot installation in Barcelona is able to recycle 100% of oxygen, water, bio-waste. Provided there is a reliable distribution infrastructure, there is no reason why it should be too close to the system. One idea would be to have a central hub that distributes resources to all the habitats.

What is the degree of redundancy of such a system (imagine loss of insulation capacities of the inflatable/accident)? Operating with a no redundancy or even single redundancy is not an option for the Melissa system. It operates on a redundancy level by which at every moment two systems are working in parallel. In case one of them stops working, the other takes over. Regarding the possibility of an accident such as a fire inside the inflatable, the space must be evacuated and isolated, first extinguishing the fire, switching off the ventilation system, making sure smoke does not spread around and that no more oxygen is coming in.

We are excited to stay in tune with the development of the Melissa system, realizing that the dialogue between the technical development of such a system and its architectural purpose relating human life support for off-Earth habitats will be essential.

https://www.esa.int/Enabling_Support/Space_Engineering_Technology/Melissa/Closed_Loop_Compartments


3D printing approach

3D printing using swarm of rovers has been explored for a project on Earth (http://100ybp.roboticbuilding.eu/index.php/project02:ROBOTIC-PRODUCTION) and could be envisioned to be implemented similarly off-Earth.

structure_cs.gif

Anim. 1: 3D printing swarm of rovers

Adaptive 3D Voronoi approach

Voronoi principle.jpgVoronoi41.jpg

Fig.2: Voronoi principle (left) and 3d application (right)


For spatial allocation at neighborhood scale we considered using the Voronoi logic. The advantages would be:

1. Extension of neighboring living areas.

2. Economy of resources due to less excavation (shared connection tunnels, shared material).

3. Possible organizational model for internal subdivision of space.

1700px-Voronoi bend 1.jpg Fig.3: 3D-printed Voronoi applications


Robotic Production

20200309 194158.jpg

Experiments with ice caps as insulation medium from radiation

Keywords

Inflatable, ice cap, pressurization, radiation shield.

Abstract

The discovery of water ice immediately under the surface of Mars by NASA’s Phoenix lander in 2008 prompted in our team an idea. Due to the very thin atmosphere surrounding the planet, an inhabited space needs good shielding from radiation. Solid water presents an opportunity.


20191201 233809.jpg Fig.4: Experiment for an ice cap

Description

We have considered two options, both based on the act of excavating the soil. The first kind of excavation needs to go deep enough so that a thickness of 5 meters of Martian soil can act as insulation for the radiation. The second one, for the moment in its conceptual and experimental stage, still underground, would minimize the excavation effort and insulation from radiation will rely on an ice cap of 1 meter thickness. Because water does not subsist in liquid form in the atmospheric conditions aforementioned, the ice caps will be enclosed and pressurized to prevent loss of ice mass (for example during the day when temperatures rise to 20 degrees Celsius.

For the time being, the team considers also the capabilities of these ice caps to absorb and transmit (sun)light, functioning as skylights. Several geometries will be explored and made available to ‘take a shine to’.

First experiment, Inspired by diverging-lens geometry. The convex side as seen from top-view, collects light and transmits it. It was visible, through the experiments, that the point where this curved surface is cut by an arbitrary plane, the ‘cut’ edges will shine the light transmitted from the opposite side.


20191201 233828.jpg

20191201 233845.jpg20191201 233856.jpg 20191201 233950.jpg20191201 234010.jpg Fig.5: study of transmission of light in different illumination conditions

Future questions

Further research will explore the feasibility of this idea in terms of:

1. Capabilities of pressurization of this specific inflatable.

2. Availability of ice to be used.

3. Technology necessary to model the ice in the desired shape.

4. Structural challenges.


Stay tuned for more!


20200101 195514.jpg20200101 195947.jpg Fig.6: Conditions of light transmission within fragmented mediums (top) and at sharp angles (bottom)

20200101 200145.jpg 20200101 195538.jpg

References:

1.Robotic Landscapes: Designing Formation Processes for Large Scale Autonomous Earth Moving PDF Link

2.Autonomous Additive Construction on Mars PDF Link

3.Automation in Construction-Large-scale 3D printing by a team of mobile robots PDF Link

4.Power related solutions for the proposal RTG:PDF Link

5.Design and Development of the ESA Am-Fueled Radioisotope Power Systems PDF Link

6.European Space Nuclear Power Programme: UK Activities PDF Link

7.ESA HHM Report:PDF Link

8.NUCLEAR POWER TECHNOLOGIES FOR DEEP SPACE AND PLANETARY MISSIONS: PDF Link

9.Power solutions for cold dark environments: PDF Link

10.Powering a colony on mars:PDF Link

11.Turning Heat into electricity: PDF Link